LinuxAlternative
SimpleScreenRecorderLinux vs Elgato Game Capture HDWindows

SimpleScreenRecorder als Linux-Alternative zu Elgato Game Capture HD

Aktualisiert am

Unser Fazit

SimpleScreenRecorder is a good replacement for Elgato Game Capture HD only if you already have a UVC-compliant USB capture device. It doesn’t replace the hardware but works with it. Linux users capturing gameplay from consoles via HDMI can use SimpleScreenRecorder to record or stream with low CPU overhead, especially when leveraging hardware encoding. It supports standard formats and offers solid configuration options. However, it won’t help those relying on Elgato’s proprietary software stack or wanting plug-and-play simplicity without a compatible capture device.

Funktionsabdeckung65%
Lizenz
GPL-3.0
Preis
Kostenlos
Aktuelle Version
0.4.4
Bewertung
—

Was gleich funktioniert

  • Both support 720p and 1080p recording from external video sources via USB capture devices
  • Support for low-latency monitoring during capture
  • Save recordings in standard formats like MP4 and MKV
  • Work with UVC-compliant capture hardware under Linux
  • Allow audio capture from system and microphone sources

Was anders ist

  • SimpleScreenRecorder is software only and requires separate HDMI capture hardware
  • Elgato includes dedicated hardware with pass-through; SimpleScreenRecorder relies on third-party UVC devices
  • Elgato Game Capture HD software offers tighter hardware integration and setup wizard
  • SimpleScreenRecorder lacks built-in streaming to platforms like YouTube or Twitch
  • No real-time effects or overlays like those in Elgato's software

Ihre Elgato Game Capture HD-Dateien öffnen

SimpleScreenRecorder saves files in standard formats like MP4 and MKV, which are universally playable and editable in most video software. While it doesn’t directly open Elgato-recorded files, those are typically in MP4/H.264 and can be used without conversion. If Elgato files use non-standard containers or codecs, transcoding may be needed, but this is rare. SimpleScreenRecorder’s output is fully compatible with workflows that accept standard video files.

Von Elgato Game Capture HD zu SimpleScreenRecorder wechseln – Schritt für Schritt

  1. Obtain a UVC-compliant HDMI capture device compatible with Linux
  2. Install SimpleScreenRecorder via your distro’s package manager (e.g., apt or zypper)
  3. Connect the capture device and verify it appears in /dev/video*
  4. Launch SimpleScreenRecorder, select the video device as input source
  5. Configure audio input from PulseAudio and set output format to MP4 or MKV
  6. Start recording after previewing the feed to confirm signal

Wichtige Funktionen von SimpleScreenRecorder

  • Aufnahme des gesamten Bildschirms, Fensters oder eines benutzerdefinierten Bereichs
  • Live‑Vorschau während der Aufnahme
  • Audioaufnahme von PulseAudio und Mikrofon
  • Mehrere Ausgabeformate (MP4, MKV, AVI)
  • Unterstützung für hardwarebeschleunigte Kodierung
  • Pause/Weiter während der Aufnahme
  • Befehlszeilen‑Interface für Skripting
  • Konfigurierbare Bildrate und Qualitätsvoreinstellungen

SimpleScreenRecorder unter Linux installieren

Ubuntu / Mintsudo apt install simplescreenrecorder
Debiansudo apt install simplescreenrecorder
openSUSEsudo zypper install simplescreenrecorder

Häufige Fragen

Can SimpleScreenRecorder work with the Elgato Game Capture HD hardware?

Yes, the Elgato Game Capture HD is UVC-compliant and works with SimpleScreenRecorder on Linux when used as a video input device.

Does it support hardware encoding to reduce CPU load?

Yes, if your system has VAAPI or similar support, SimpleScreenRecorder can use hardware-accelerated encoding to minimize CPU usage.

Can I stream live to platforms like Twitch?

Not directly. SimpleScreenRecorder is designed for local recording. For streaming, use OBS Studio instead.

3 weitere Alternativen zu Elgato Game Capture HD

Alle Alternativen zu Elgato Game Capture HD

SimpleScreenRecorder bewerten

Als Erste(r) bewerten
Guter Ersatz für Elgato Game Capture HD? 7